静压注浆技术袖阀管注浆技术.pptVIP

昵图网 nipIc. com静压注浆一袖阀管注浆 龙 Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  静压注浆 根据注浆压力的不同,可将注浆法分为静压注浆 和高压喷射注浆两大类。 静压注浆一般压力较低,注浆压力随着浆流遇到 的阻力增大而升高,浆液注入后为流动状态。 低压注浆:静压注浆,5MPa以下 按注浆压力 中压注浆:5~15MPa 高压注浆:15MPa以上 Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  根据地质条件、注浆压力、浆液对土体的作用 机理、浆液运动形式不同,静压注浆分为五种: ①充填或裂隙注浆( Fill or Fissure Grouting) 用于大洞穴,构造断裂带, 衬砌壁后注浆及节理裂隙 的防渗固结注浆,压力可 小可大 Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  ②渗透注浆( Permeation grouting) SOIL GROUTING METHODS Compaction Permeation Fracture Replacement Solidification Reinforcement Mix/ Replace M nor re Add cohesion Minor reduction Impermeable in permeability Decrease in permeabili Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  在不破坏地层颗粒排列条件下,浆液充填 于颗粒间隙中,将颗粒胶结成整体。 渗透注浆必要条件:d液(d士,此法注 浆压力最小。 面面 (, 米状 水大(b4 ,半示 出bop 发关 °的图42浆液的扩散形状 :中为 图4-1渗透注浆示意图 (分直(a)球面扩散,(b)柱面扩散 示回面只分半顶亲故)出从亲 Valadon onry. ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  Permeation grouting Valadon only ch Asposeslides for NET 4o dient P Evaluation only. Created with Aspose Slides for NET 4.0 dient Profilo 71 Copyright 2004-2017Aspose Pty L  ③压密注浆( Compaction Grouting) 注入极稠浆液,形成球形或园柱体浆泡,压 密周围土体,使土体产生塑性变形,但不使土 体产生劈裂破坏。 铁因,励味率的补土会固据土 节同 圆面,带的 具人量土 土非 再的需非3变的未圆会出出,主裂内( 5人 k。没