悬浮法生产聚氯乙烯作业流程设计.docVIP

3000吨/年聚氯乙烯悬浮聚合工艺设计 摘 要 本设计为年产3000吨聚氯乙烯聚合工艺设计，整个设计文件由设计说明书和设计图纸两部分组成。在设计说明书中，简单介绍了聚氯乙烯生产现实状况、发展趋势、性能和关键用途，着重介绍以悬浮聚正当作为聚合工艺生产方法。在设计过程中，依据设计任务书要求，进行了较为具体物料衡算和热量衡算和聚合釜计算，对设备进行了工艺计算和选型，同时对整个装置进行了简单技术经济评价。绘制了对应设计图纸，设计图纸包含工艺步骤图、聚合釜装配图。 关键词：聚氯乙烯，悬浮聚合工艺，干燥， 单体，生产工艺 Abstract The design for the 3,000 tons of PVC polymerization process design throughout the design file is composed by two parts of the design specification and design drawings. In the design manual, a brief introduction of PVC production status, development trends, performance, and the main purposes highlighted by suspension polymerization as the polymerization process production methods. In the design process, according to the requirements of the design task book to conduct a more detailed material balance and heat balance and the the polymerizer calculation process calculation and selection of equipment, a simple techno-economic evaluation of the entire device . Drawing of the design drawings, design drawings including process flow diagram of the polymerization reactor assembly drawing. Keywords: PVC ,suspension polymerization process, dry, monomer ,production process 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 前　言 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 第1章 产品及原料说明 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.1 产品性质及质量标准 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.1.1 名称及其结构 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.1.2 产品性能 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 1.1.3产品质量标准 PAGEREF _Toc \h 3 HYPERLINK \l _Toc 1.2 单体氯乙烯（VCM）性质 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 1.3聚氯乙烯配方 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 第2章 聚氯乙烯生产工艺步骤设计 PAGEREF _Toc \h 7 HYPERLINK \l _Toc 2.1 聚氯乙烯生产工艺步骤简述 PAGEREF _Toc \h 7 HYPERLINK \l _Toc 2.2 聚氯乙烯生产工艺步骤操作步骤 PAGEREF _Toc \h 7 HYPERLINK \l _Toc 2.2.1 聚合单元 PAGEREF _Toc \h 7 HYPERLINK \l _Toc 2.2.2 汽提、干燥工序 PAGEREF _Toc \h 8 HYPERLINK \l _Toc 2.2.3 VC回收工序 PAGEREF _Toc \h 8 HYPERLINK \l _Toc 第3章 物料衡算 PAGEREF _Toc \h 10 HYPERLINK \l _Toc 3.1 车间物料衡算 PAGEREF _Toc \h 10 HYPERLINK \l _Toc 3