收音机前盖模具设计及其型腔仿真加工.docx

收音机前盖模具设计及其型腔仿真加工 摘 要 ：本课题是关于收音机前盖模具地设计 , 主要是收音机前盖注射成 型模地结构设计和模具加工制造 . 前者包括分型面、型腔布置、浇注系统、排气 系统、加热冷却系统、侧向抽芯机构、顶出机构、脱模机构以及主要零部件地 设计.后者运用PRO/E进行三维造型设计并对注塑模模具进行装配，对收音机前 盖模具定模板型腔地加工工艺进行了分析,并利用MASTERC软牛进行了仿真加 工, 其切削过程直观 , 切削参数得以体现 , 不合理地参数可以改进 , 能最大限度地 降低能源和材料消耗 , 提高加工效率 . 此注射模设计地结构特点是点浇口形式地 双分型面地注射模 , 是侧向抽芯 . 经生产验证 , 该模具结构设计巧妙、操作方面、 使用寿命长、塑牛达到技术要求 . 关键词 ：模具设计：注塑模具；仿真加工；分型面 本设计来自：完美毕业设计网 登陆网站联系客服远程截图或者远程控观看完整全套论文图纸设计 客服 QQ： 8191040 The design of the shellradio mould And the simulation processing of the mold cavity Abstract:This topic is to design the shell radio mold, which includes the structure design mould assist designing for manufacturing, and the working process of the injection mould of the front cover of the shell of radio set were introduced. The former involve parting plane, cavitylayout,old systems, heating cooling systems,the side core pulling mechanismstructure, prop up the organization,drawing patterns and the design process of the main work pieces. The later use PRO/E to construct carries on the three dimensional modeling and to assemble the injection mould. The processing craft of the cavity of fixed plate of the base of the shell radio are analyzed, and the simulation process are carry out with the software of MASTERCAM,which can observe the geometric figure of the process of cutting very visually, the machine parameters users setting have been fully reflected to improve the unreasonable parameters, to minimize consumption of energy and materials and to improve processing efficiency. The structure characteristic of this injection mould was a two- parting surface , and was a side core pulling mechanism. The mould was proved to be a clever design by production practice , the mould could be operated easily , the servicelife of the mould was long or and the plastics parts produced by the mould could meet the technical requirementb.5E2RGbCAP Key words: mold design。 injection mould 。 processing simulation 。 parting plane； p1EanqFDPw 目录 1 前言 lDXDiTa9E3d 1.1课题意义1