多进制数字相位调制MPSK系统要点.docxVIP

Abstract Multiple Phase Shift Keying (MPSK - multiple phase shift keying) is also called multi-phase system, which is the promotion of the two-phase system. It is the modulation to characterize digital information using the different carrier’s phase state. Similar with the Binary Digital Phase Modulation, it has the absolute phase modulation (MPSK) and phase modulation (MDPSK) as the two kinds of modulation methods. This article is mainly about the Multiple Phase Shift Keying system (MPSK) based on Xilinx ISE simulation software design, setting 4PSK as an example. The modulation method is the simple phase-selection method. It only concentrates on the design of digital system, neglecting the analog circuit system. Keywords: Multiple Phase Shift Keying MPSK Xilinx ISE phase-selection method 摘 要 多进制数字相位调制（ MPSK - multiple phase shift keying）又称多相制， 是二相制的推广。它是利用载波的多种不同相位状态来表征数字信息的调制 方式。与二进制数字相位调制相同，多进制数字相位调制也有绝对相位调制 （MPSK ）和相对相位调制（ MDPSK ）两种。 本文主要研究基于 Xilinx ISE 仿真软件设计的多进制数字相位调制 (MPSK) 系统，以 4PSK 系统为例。调制方法采用简便的相位选择法，且略去 模拟电路系统部分，仅对数字系统进行设计。 关键字 : 多进制数字相位调制 MPSK Xilinx ISE 相位选择法 武汉理工大学《 FPGA 课程设计》说明书 目录 Abstract ............................................................................................................. 1 摘 要 ............................................................................................................... 2 1 多进制数字相位调制 ................................................................................... 1 1.1 MPSK 概念 ......................................................................................... 1 1.2 MPSK 原理 ......................................................................................... 1 2 四相相位调制（ 4PSK） ............................................................................. 2 2.1 4PSK 调制 .......................................................................................... 2 2.1.1 相位选择法 .............................................................................. 2 2.1.2 直接调相法 ................................