目视检验规范IPC610（PPT34页).pptxVIP

目視檢驗規范IPC610IPQC RUI_LI2010/1/20;目視檢驗規范標准IPC610; 零件本體僅下方有二接觸點的零件(Chip Components/Bottom Only Terminations cont.) – 偏移 (Shift) ;零件本體有1,3,5面矩形金屬焊接點  (Rectangular End Components-1,3or5 side Termination) – 偏移 (Shift) ;零件本體有1,3,5面矩形接觸點 (Rectangular End Components-1,3or5 side Termination) – 偏移 (Shift) ; 圓柱體零件 (Cylindrical End Cap Termination) – 偏移 (Shift) ;無導腳零件(Leadless Chip Carriers with Castellated Terminations) – 偏移 (Shift) ;;I 腳 (“I” Leads) – 偏移 (Shift) ;範例 (Example) - 平緞腳 (L型) / 鷗翼腳 /圓柱L腳  (Flat Ribbon L / Gull Wing leads / Round l