三角插座注塑模具设计.docVIP

PAGE 26 PAGE 26 PAGE PAGE 1 三角插座底座注塑模设计  摘 要 注塑成型是塑料模具制造业的关键成型方法之一，尽管注塑模具的发展水平在不断提高，但是在注塑成型的过程中仍旧存在着许多的缺陷。现在人们总是依靠认真地反复修改模具，以此来得到不错的使用效果和较长的使用期限。但是在当今这个飞速发展的社会，纯人工化的修饰和改善已经不能满足当今时代的生产要求了。因此,越来越多的企业开始使用相关软件来分析并设计出更完善的模具，从而大大地减少了模具整修的周期，提高了模具的工作效率等。 根据塑料制品的要求，了解塑件的用途，分析塑件的工艺性、尺寸精度等技术要求，考虑塑件制件尺寸。本模具采用一模二腔，侧浇口进料，注射机采用HT80XB型号，设置冷却系统，CAD和UG绘制二维总装图和零件图，选择模具合理的加工方法。附上说明书，系统地运用简要的文字，简明的示意图和和计算等分析塑件，从而作出合理的模具设计。 关键词：模具设计；CAD绘制二维图；三维造型：成型工艺分析 Abstract Injection molding is one of the key methods of plastic mold manufacturing, although the development level of injection mold is improving, there are still many defects in the injection molding process. Now people are always relying on serious and repeated modification of the mold, in order to get a good use effect and longer service life. However, in todays rapid development of society, the modification and improvement of pure artificial can not meet the requirements of todays production. Therefore, more and more enterprises begin to use the relevant software to analyze and design a more perfect mold, thus greatly reducing the mold repair cycle, improve the efficiency of the mold, etc.. According to the requirements of plastic products, understand the use of plastic parts, analysis of plastic parts of the process, size precision and other technical requirements, considering the plastic parts size. This used a mold two cavity, on both sides of the oblique guide pillar core pulling, side gate, injection machine adopts HTF110XB model, set up the cooling system, the slide block core pulling mechanism, CAD and UG drawing two-dimensional assembly and parts drawing, choose the reasonable processing method of mould. Attach the instruction, systematically use the brief text, concise schematic diagram and calculation analysis of plastic parts, so as to make a reasonable mold design. Key words: mold design; CAD drawing two-dimensional graph; three-dimensional modeling: forming process analysis 目 录 TOC \o 1-3 \h \z