python的kvm虚拟机状态值监控.docxVIP

python 的 kvm 虚拟机状态值监控python 获取 kvm 虚拟机状态值 测试代码，其中只包含了基本的信息，所有的信息都是通过libvirt 的 api 来获取的。具体的实现代码可以优化。 import libvirt import memcache import os import time from xml.etree import ElementTree as ET mc = memcache.Client([192.168.0.112:11211]) while True: conn = libvirt.open(qemu:///system) dom = conn.listDomainsID() for i in dom: vmm_id = conn.lookupByID(i) vmm_name = vmm_id.name() if wrksp in vmm_name: try: # vmm_namevmm_name_id = vmm_name.split(-)[1] vmm_id_str = str(vmm_name) vmmid = vmm_id_str.split(-)[1] print vmmid vmm_dom_xml = vmm_id.XMLDesc(0) vmm_xml_name = vmm_id_str + . + xml vmm_xml_path = /tmp/ + vmm_xml_name print vmm_xml_path if os.path.exists(vmm_xml_path): pass else : os.mknod(vmm_xml_path) xml_open = open(vmm_xml_path,w) for lines in vmm_dom_xml: xml_open.write(lines) xml_open.close() vmm_xml_open = ET.parse(vmm_xml_path) path_list=[] path = vmm_xml_open.findall(//source) for i in path: file1 = i.attrib filename=file1.get(file) if filename: path_list.append(filename) # print path_list interface_list = [] interface = vmm_xml_open.findall(//target) for j in interface: interface_network = j.attrib dev1 = interface_network.get(dev) dev3 = vnet dev2 = str(dev1) if dev3 in dev2: interface_list.append(dev1) # print interface_list totalrd = vmmid + rd totalrd_byte = 0 totalwr = vmmid + wr totalwr_byte = 0 totalrx = vmmid + rx totalrx_byte = 0 totaltx = vmmid + tx totaltx_byte = 0 totalrp = vmmid + rp totalrx_packet = 0 totaltp = vmmid + tp totaltx_packet = 0 for image_file in path_list: # print image_file # size = vmm_id.blockInfo(image_file,0) block_status = vmm_id.blockStatsFlags(image_file,0) totalrd_bytetotalrd_byte = totalrd_byte + block_status[rd_bytes] totalwr_bytetotalwr_byte = totalwr_byte + block_status[wr_bytes] print totalrd_byte print totalwr_byte # print totalwr_byte for interfaceinfo_path in interface_list: interfaceinfo = vmm_id.interfaceStats(interfaceinfo_path) totalrx_bytetotalrx_byte = totalrx_byte + interfaceinfo[0] totalrx_packettotalrx_pa