WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0163 Nitrogen System Design Guide.pdf

Nitrogen System Design Guide Document No: KS-PR-DEG-0163 Rev 0 01 December 2019 © Copyright 2019 Worley ACN 096 090 158. No part of this document or the information it contains may be reproduced or transmitted in any form or by any means electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from Worley. Table of Contents 1. Introduction 3 1.1 General3 1.2 Functional Requirements3 2. System And Equipment Design 3 2.1 General3 2.2 Information Required 3 2.3 System Capacity 3 2.4 Nitrogen Generators 4 2.4.1 Membrane Systems4 2.4.2 Pressure Swing Adsorption (PSA) 4 2.4.3 Combustion Nitrogen Generators 5 2.5 Supply from Shore5 2.5.1 Liquid Nitrogen 5 2.5.2 Nitrogen Cylinders 5 2.6 Nitrogen Distribution 5 3. References 6 Nitrogen System Design Guide ii KS-PR-DEG-0163 Rev 0 01 December 2019 1. Introduction 1.1 General This guide provides guidelines for the design of Nitrogen Systems on offshore oil and gas production installations. There are common elements to the design of onshore facilities. 1.2 Functional Requirements Most offshore facilities require a reliable supply of Nitrogen for purging and blanketing purposes. On large offshore production installations, Nitrogen is commonly generated on board. On smaller facilities, it may be more economical to maintain a regular supply of commercially available liquid or gaseous Nitrogen. Nitrogen is required in large quantities during shutdow