WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0164 Diesel System Design Guide.pdf

Diesel System Design Guide Document No: KS-PR-DEG-0164 Rev 0 01 December 2019 © Copyright 2019 Worley ACN 096 090 158. No part of this document or the information it contains may be reproduced or transmitted in any form or by any means electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from Worley. Table of Contents 1. Introduction 3 1.1 General3 1.2 System Requirements 3 1.3 Diesel Usage Rates 3 2. Diesel Quality Requirements 3 2.1 Raw Diesel3 2.2 Treated Diesel 4 2.3 Diesel Users4 3. Drilling Operations 4 3.1 Loading Facilities 4 3.2 Storage Tanks 5 3.3 Transfer Pumps 5 3.4 Treatment Equipment 5 3.4.1 Centrifuges 5 3.4.2 Filtration/Coalescing 5 3.5 Control and Monitoring 6 3.6 Isolation 6 3.7 Utility/Interface Requirements 6 3.8 Materials 6 3.9 Maintenance 6 4. References 7 Diesel System Design Guide ii KS-PR-DEG-0164 Rev 0 01 December 2019 1. Introduction 1.1 General This design guide provides guidelines for the design of diesel systems for offshore oil and gas production installations. There are common elements to the design of onshore facilities. 1.2 System Requirements A typical diesel system consists of facilities for loading, storage and treatment of raw diesel that is supplied to the offshore installation by boat, and for supplying treated and untreated diesel to users. The first step in designing a diesel system is to identify the us