WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0160 Fresh and Potable Water System Design Guide.pdf

Fresh and Potable Water System Design Guide Document No: KS-PR-DEG-0160 Rev 0 01 December 2019 © Copyright 2019 Worley ACN 096 090 158. No part of this document or the information it contains may be reproduced or transmitted in any form or by any means electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from Worley. Table of Contents 1. Introduction 3 1.1 General3 1.2 System Requirements 3 1.3 Desalination 3 1.4 Fresh Water Storage 3 1.5 Potable Water Usage 3 2. Water Treatment Requirements 4 2.1 Seawater 4 2.2 Fresh Water4 2.3 Potable Water 4 3. System and Equipment Design 5 3.1 Unloading Facilities 5 3.2 Potable Water Storage Tanks 5 3.3 Potable Water Distribution Pumps 5 3.4 Disinfection 5 3.4.1 Chlorination 5 3.4.2 Ultraviolet Light Disinfection5 3.5 Materials of Construction 6 3.6 Safety Showers6 4. Definitions7 5. References 7 Fresh and Potable Water System Design Guide ii KS-PR-DEG-0160 Rev 0 01 December 2019 1. Introduction 1.1 General This design guide primarily provides guidelines for the design of Fresh/Potable Water systems for offshore oil and gas production installations. These guidelines can also be applied to onshore facilities. Fresh water – Non-saline untreated water Potable – Treated fresh water 1.2 System Requirements Fresh Water can be provided to the platform from supply boat via unloading facilities, or alternatively be produced by desalination of seawater