电机前端盖注塑模具设计说明书.docxVIP

PAGE PAGE 2 摘 要 中国是制造业大国，人口众多，我国注塑模具设计已经成为国内经济发展的基本工业，塑料制品常常出现在我们的生活中，包括塑料杯子等等，模具成型的材料多种多样，但是塑料已经成为了一种不可或缺的材料。本次毕业设计的塑料产品是电机后端盖。在这次毕业设计中我们选择电机后端盖进行注塑模具设计。并且对实际的制件进行较为精确的测量，得到电机后端盖的具体详细尺寸，我们再利用UG画出电机后端盖的三维图形，然后对电机后端盖进行成型分析，通过对该制件进行结构分析和尺寸把握之后，用ug中的燕秀工具找到适用的模具架，制定成型工艺，确定型腔数目以及分型面，然后利用UG导出工程图的命令绘制cad二维图，并且利用word撰写说明书整理毕业论文。 关键词：制造业：注塑模具；3d；UG；工程图 毕业设计说明书 PAGE PAGE 2 Abstract China is a big manufacturing country, a large population, Chinas injection mold design has become the basic industry of domestic economic development, plastic products often appear in our lives, including plastic cups, etc., mold molding materials are diverse, but plastic has become an indispensable material. The plastic product of this graduation design is the rear cover of the motor. In this graduation design, we chose the rear cover of the motor for injection mold design. And the actual parts for more accurate measurement, to get the specific detailed size of the motor back cover, we then use UG to draw a three-dimensional graphic of the motor back cover, and then the motor back cover molding analysis, through the structural analysis of the part and the size of the grasp, with the ug in the Yanxiu tool to find the applicable mold frame, the development of the molding process, determine the number of cavities and the parting surface, and then use the UG export engineering drawing command to draw cad two-dimensional drawings, And use word to write instructions to organize the graduation thesis. Keywords: manufacturing: injection mold; 3d; UG; engineering drawings PAGE PAGE 1 TOC \o 1-3 \h \u 8995 绪论 1 30839 1.1 背景 1 30767 1.2 国内塑料模具发展情况 1 860 1.3 国外塑料模具发展状况 2 26248 第1章 塑件的工艺分析 3 994 1.1 塑件的结构分析 3 6248 1.2 塑件的材料分析 4 4488 1.3 模流分析 5 19647 1.3.1 有限元的划分 5 1859 1.3.2 浇口方案位置的确定 6 13161 1.3.3 整体方案设计 7 31571 1.3.4 分析填充保压阐述 8 24623 1.3.5分析翘曲阐述 12 22206 第2章 注射机的选择 13 13020 2.1 测量塑件体积 13 4498 2.2 确定注塑机的型号 13 17642 2.2.1注射量的计算 13 617 2.2.3注塑机的最终选择 13