喷砂、喷丸前处理对TC21钛合金超音速火焰喷涂WC-17Co涂层的影响.docxVIP

第54卷第4期2025年2月

热加工工艺

HotWorkingTechnology

ISSN1001-3814CN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.rjggy@

喷砂尧喷丸前处理对TC21钛合金超音速火焰喷涂WC-17Co涂层的影响

王浩军,胡生双,孟保利,张兵宪,赵虎,舒文芳,张颖云(中航西安飞机工业集团股份有限公司,陕西西安710089)

摘要院对TC21钛合金表面进行了喷砂尧喷丸前处理及超音速火焰WC-17Co喷涂袁研究了喷砂尧喷丸前处理对TC21钛合金超音速火焰喷涂WC-17Co涂层的影响遥结果表明袁喷砂和喷丸前处理WC-17Co涂层均呈现组织均匀袁与基材良好结合的形貌特征遥喷砂前处理后涂层与基材结合面突起或凹陷较为尖锐袁且还会存在外来氧化铝砂粒的嵌入袁而喷丸前处理后结合面凸凹圆润袁不引入外来杂质遥喷砂对TC21钛合金表面粗糙度的影响比喷丸更加显著袁但喷砂和喷丸前处理后WC-17Co涂层表面粗糙度差别不明显袁WC-17Co涂层表面粗糙度可达4.602滋m曰喷砂和喷丸前处理WC-17Co涂层硬度变化规律相似袁硬度达1600～1800HK0.98袁高于基体硬度4倍以上曰喷砂与喷丸前处理的WC-17Co涂层孔隙率相差不大袁但涂层与基体界面附近袁喷砂前处理后WC-17Co涂层孔隙率高于喷丸前处理的遥

关键词院喷砂尧喷丸前处理曰超音速火焰喷涂曰WC-17Co涂层

中图分类号院TG174.4 文献标识码院A 文章编号院1001-3814(2025)04-0038-04

EffectofGritBlastingandShotPeeningPretreatmentonWC-17COCoatingofTC21TitaniumAlloybySupersonicFlameSprayingWANGHaojun,HUShengshuang,MENGBaoli,ZHANGBingxian,

ZHAOHu,SHUWenfang,ZHANGYingyun

(AvicXianAircraftIndustryGroupCompanyLtd.,Xian710089,China)

Abstract院ThesurfaceofTC21titaniumalloywastreatedbypretreatmentofgritblastingandshotpeeningandhighvelocityoxy-fuelsprayingWC-17Co.TheeffectsofgritblastingandshotpeeningpretreatmentonTC21titaniumalloybysupersonicflamesprayingWC-17Cocoatingwerestudied.TheresultsshowthatthemicrostructureofWC-17Cocoatingwithgritblastingandshotpeeningpretreatmentisuniformandwellcombinedwiththesubstrate.Theprotrusionorsagofthebondingsurfacebetweenthecoatingandthesubstrateissharperaftergritblasting,andthereistheembeddingofforeignaluminasandparticles,whilethebondingsurfaceaftershotpeeningpretreatmentisconvexandconcave,withoutintroducingforeignimpurities.TheeffectofgritblastingonthesurfaceroughnessofTC21titaniumalloyismoresignificantthanthatofshotpeeningpretreatment,butthesurfaceroughnessofWC-17Cocoatingisnotsignificantlydifferentwithgritblastin