转子加氯机的设计和实体建模.pdfVIP

转子加氯机的设计和实体建模 摘 要 氯作为氧化剂可氧化废水中的氰、硫、酚、氨氮及去除某些染料而脱色等，也 可用来进行消毒，广泛应用于污水处理厂的脱色和消毒工艺中。水处理工艺中采用 的氯的形态主要有液氯和漂白粉，氯的投加设备根据氯的形态不同而异，加氯机是 液氯的投加设备，我国现今最为广泛使用的加氯设备就是转子式加氯机。国内最常 见的加氯机是 ZJ 型转子加氯机。其主要组成部分有：旋风分离器、弹簧膜阀、控 制阀、转子流量计、中转玻璃罩、水射器、水箱等。本设计以 ZJ 型转子加氯机的 原理构造为参考，根据任务书给出的条件对旋风分离器、中转玻璃罩、水射器、水 箱等组成部分进行了计算和设计，对其它部分进行了选型，并对设备的密封安全性 进行设计,同时还采用 UG 三维设计软件对加氯机的各组成部分进行了三维实体模 拟，最终设计出一套高效可行的转子加氯设备。 关键词：转子加氯机，消毒，转子流量计，旋风分离器,水射器 Ⅰ 转子加氯机的设计和建模 Abstract Chlorine can oxidate cyanogen, sulfur, hydroxybenzene, ammonia nitrogen and remove some colour matter to decolour and so on, and also can be used in disinfection. Chlorine is wildly used in decolouring and disinfection in sewage plant. The chlorine mainly in the form of liquid chlorine and chloride of lime in the water treatment, the equipment of feeding chlorine is different for the different form of chlorine, chlorinator is the equipment for liquid chlorine feeding. At the present, rotor chlorination plant is the most generally used equipment for feeding chlorine in our country. Its main parts are: cyclone, diaphragm valve, control valve, rotameter, the glass cover and water injector etc.. In this paper, according to the ZJ-1 type rotor chlorination plants principle and structure, the design and calculation of some parts are made, and some parts choice , the safety of seal of the equipments is designed, and then the three dimension entity simulation of the parts of chlorine plant is made with UG. A efficiently rotor chlorination plant is designed in the end. Key words ：rotor chlorination plant ，disinfection，rotameter, t cyclone ，water injector Ⅱ 转子加氯机的设