基于特征点的光纤位置检测方法.pdfVIP

第29卷 增刊 光电工程 Vol.29, Sup 2002年12月 Opto-Electronic Engineering Dec, 2002 文章编号：1003-501X(2002)Sup-0035-03 基于特征点的光纤位置检测方法 1 1 2 1 1 李为民 ，俞巧云 ，王 骞 ，李 杜 ，邓伟平 （1．中国科学技术大学精密机械与精密仪器系,安徽 合肥 230027； 2．安徽省9058单位,安徽 合肥 230061） 摘要：介绍对光纤端部位置的非接触检测方法。以面阵CCD为传感器，检测光纤端部出射光斑， 采用“重心法”提取光斑的特征点表征光纤的位置。着重分析了光源稳定性、CCD性能、AD采样 位数对测量结果稳定性的影响。实验表明，基于特征点对光纤端部检测，重复精度达到 0.7 的 CCD像素，系统具有良好的稳定性。 关键词： 非接触测量；光纤；位置测量；CCD传感器 中图分类号： TN25 文献标识码：A An optic fiber position detection method based on characteristic points 1 1 2 LI Wei-min , YU Qiao-yun , WANG Qian , 1 1 LI Du , DENG Wei-ping （1.Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230027, China； 2.No. 9058 Unit of Anhui Province, Hefei 230061, China) Abstract: A noncontact method used for detecting end position of optic fib er is presented. With planar array CCD sensor, exit spot from optic fiber end is detected through extracting the characteristic points of spot for characterizing the position of optic fiber. The influence of light source stability, CCD performance and AD sampling digit on the stability of measuring results is analyzed. Detection of optic fiber end based on characteristic points, the experiments show that the system has a good stability and its repetition accuracy is as high as 0.7% of CCD pixel. Key words: Contactless measurement;