现场混装用乳胶基质工艺及设备系统的研究及应用.pdfVIP

现场混装用乳胶基质工艺及设备系统的研究及应用 肖 红，刘再强，石先奉 （深圳市金奥博科技有限公司，广东深圳 518057 ） 摘要：本文阐述了JWL-S 型现场混装用乳胶基质工艺及设备系统的研究背景、主要组成、技术特点和应用情况。 该系统采用敞开搅拌式静态乳化技术，具有转速低、本质安全性高、产能大、能耗低等特点；生产的乳胶基质 无雷管感度和起爆弹感度，通过危险品运输试验系统8 测试，可归类于5.1 氧化剂级；该生产工艺的水、油相 温度低，淘汰封闭式冷却器，乳胶通过通冷却水的带夹套管路正常输送即可降温到65℃左右，生产能耗低；生 产的乳胶基质性能好，储存期长。通过工业化应用证明其具有良好的经济效益和社会效益。 关键词：现场混装；静态乳化；乳胶基质 The Research and Application of On-site Mix-loading Emulsion Matrix Technology and Equipment System XIAO Hong, LIU Zaiqiang, SHI Xianfeng (Shenzhen King Explorer Science and Technology Co., Ltd., Shenzhen, 518057,China) Abstract: This article expounds the research background, major component, technical feature and application of the JWL-S On-site Mix-loading Emulsion Matrix Technology and Equipment System. This system, which adopts the static emulsification technology with open type agitation, is featured with low rotate speed, high intrinsic safety, large productivity, low energy consumption, etc. The emulsion matrix without detonator sensitivity has passed the carriage of dangerous goods testing system 8; which means it can be classified as 5.1 oxidizing agent class. This technology requires lower temperature on oxidize and fuel phase material, without the closed type cooler, the emulsion goes through pipelines with cooling water in the pipeline jacket , so it can be cooled down to around 65℃ after the normal transport, which consumes lower energy for production. The emulsion produced with this technology has excellent performance and long shelf-life, the industrial application has proven it has brought favorable economic and social benefits