基于ProE启盖器装配和运动仿真【毕业论文】.doc

本科毕业论文 （20 届） 基于Pro/E启盖器装配和运动仿真 专业：机械设计制造及其自动化 摘要 启盖器是日常所用比较平凡的工具，它所包含的机械机构简单而又实用，装配启盖器并且能够仿真运动是设计启盖器所必要的步骤。基于Pro/E的装配与仿真能够更直观的看到启盖器工作时的机构运动方式。 用Pro/E的装配操作简单快捷，立体效果良好，能让设计者及时发现问题，缩短设计时间。而它的仿真运动更能体现出装配件的动态效果，发现结构问题及时纠正。基于Pro/E装配首先要设定好各零件尺寸要求，在此基础上设计基本零件，然后运用Pro/E的组件模式装配启盖器，在机构中分析它的运动仿真。在装配过程中要注意约束方式，便于仿真中减少问题。本文所采用的是杠杆式启盖器，描述说明了启盖器的零件设计到绘制装配再到仿真运动的全过程。 用Pro/E装配启盖器及仿真运动是Pro/E运用中的一小部分。它的创新之处在于将仿真技术引入到启盖器机构的活塞运动与槽连接中，直观的了解到启盖器的运作，能够及时发现设计中的不足与错误之处，让设计者节约不少时间与精力。是Pro/E装配及仿真运动中一个比较良好的例子。 关键词：Pro/E；设计；装配；运动仿真 Abstract Kai cover device is relatively mundane everyday tools used in it contains simple and practical mechanical structure, the assembly of the Kai cover device simulation exercise is to design and can start the steps necessary to build devices. Based on Pro / E assembly and simulation can be more intuitive device that covers the work of Kai body movement.  Using Pro / E assembly operation simple and quick, three-dimensional effect is good, timely detection of problems allows designers to shorten design time. And its simulation exercise to better reflect the dynamic assembly, and found time to correct structural problems. Based on Pro / E assembly set up the first part size requirements, based on the design of the basic components of this, and then use Pro / E assembly of the component model Kai cover device, in the bodies of its motion simulation. During assembly constraints should pay attention to ways to reduce the problem to facilitate simulation. This article is used in leveraged Kai cover device, device description describes the part of Kai cover design to draw the assembly and then the whole process of simulation exercise. Using Pro / E assembly and simulation devices Kai cover movement is Pro / E using a small part of its innovation lies in the simulation technology into the device body Kai piston cover and slot connection, the intuitive understanding Kai cover the operation of devices, the ability to detect design deficiencies and mistakes, allows