纳米材料绿色制版技术研究.pdfVIP

中国印刷与包装研究 2010年11月（第 2 卷） CHINA PRINTING AND PACKAGING STUDY Vol.02 2010.11 397 纳米材料绿色制版技术研究 周海华，宋延林  （中国科学院化学研究所，北京 100190） 摘要 目前普遍应用的激光照排和计算机直接制版（CTP ）技术主要是基于感光成像的原理，技术流程和工 艺较复杂，曝光显影过程产生的废液不仅浪费资源而且对环境造成污染。纳米材料绿色制版技术是将纳米复 合转印材料以图文的形式打印在具有纳微米结构的超亲水版材上，通过转印材料与版材界面性质的调控，使 印版上形成亲油的图文区和亲水的非图文区，制得的版材可以直接上机印刷，无需曝光、显影等处理过程。 由于摒弃了感光成像的思路，无需暗室操作，在简化制版的流程、消除环境污染的同时，大大降低了生产成 本。纳微米结构超亲水版材和纳米粒子复合转印材料的制备和应用，有效地解决了印版应用中的两个关键问 题：印版精度和耐印力。本文简要介绍了纳米复合转印材料及超亲水版材的研究进展。 关键词 印刷；纳米材料；制版技术；数字成像 中图分类号 TS802.4 Study on Green Plate Making Technology based on Nano-Materials ZHOU Haihua, SONG Yanlin （Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China. ） Abstract Laser phototypesetting and computer to plate (CTP) technologies are widely used in print industry. These technologies are based on complex photosensitive image process. The exposing and development processes result in waste of photosensitive materials and environment pollution. Green plate making technology is not based on photosensitive materials but nano-materials. The image process of the technology is to jet the nano-composite transfer printing material on super hydrophilic print plate with special nano and micro-structure. Then the oleophilic image area and hydrophilic non image area are formed by adjusting interface characters between the nano-composite transfer printing material and super hydrophilic print plate. The plate is used for printing without exposing and development. Without photosensitive image process, the technology has many advantages such as no operation in darkroom, simple process, environmental friendly and low cost. The key problems of print resolu