剑麻纤维素微晶增强酚醛树脂复合材料的制备及性能.pdfVIP

* 541004 SF KH550 MSFCM MSFCM PF MSFCM/PF DMA MSFCM MSFCM/PF SEM MSFCM 6%50.32%4% 31.37%18.85%MSFCM MSFCM/PF MSFCM 6%0.36~0.44 MSFCM 15%GB5763-2008 MSFCM MSFCM/PF TB383 A Preparation and properties of Sisal Fiber Cellulose Microcrystal reinforced Phenol-formaldehyde resins composites Chun Wei*, Sihua Zeng , Shaojun Huang, Hong xia Liu, Jian Lv, Chuanbai Yu (College of Materials Science and Engineering , Key Laboratory of New Processing Technology for Nonferrous Metals, Ministry of Education, Guilin University of Technology , Guilin 541004 , China) Abstract: In this paper, sisal fiber cellulose microcrystal(SFCM) was extracted from sisal fiber, then SFCM was modified by silane coupling agent KH550 which is called MSFCM. The MSFCM/ phenol-formaldehyde ( PF) composites with different contents of MSFCM were prepared by blending technology and molding method. The mechanical properties, creep, stress relaxation and friction properties of MSFCM/PFcomposites were investigated by DMA and constant speed tribological tester ( DMS). And the impact fracture and worn surface of MSFCM/PF composites were observed by scanning electron microscope ( SEM) . The results showed that when MSFCM content was 6%, the impact strength of the MSFCM/PF composites were increased by 50.32%, as comparing with pure PF composites. the creep , stress relaxation properties of the MSFCM/PF composites are also improved. As comparing with pure PF composites, when MSFCM content was 4%, the creep and stress relaxation of the composites are increased by 31.37% and 18.85%, respectively. When MSFCM content was 6%, the frictio