基于多级流模型的火力发电系统故障诊断方法的研究.pdfVIP

Proceedings of the 29th Chinese Control Conference July 29-31, 2010, Beijing, China 基于多级流模型的火力发电系统故障诊断方法研究* 1,2 2 1 顾小军 ，杨世锡，钱苏翔 1. 嘉兴学院机电工程学院, 浙江嘉兴314001 E-mail: guxiaoj un60@ 2. 浙江大学机械系, 浙江杭州310027 E-mail: yangsx@zj 摘 要: 现代火力发电系统的日益复杂，使各子系统及设备之间的耦合关联度越来越高。单一设备的故障会引起多个 设备的链式反应，增加了故障诊断的难度。本论文以火力发电系统为研究对象，通过建立系统多级流模型（Multilevel Flow Models, MFM ），分析反映复杂系统中设备关联耦合的物质流、能量流、信息流之间关系及其状态变化，识别 系统的源故障，旨在弥补目前基于单一设备的故障诊断方法对于复杂耦合系统故障诊断的不足。 关键词: 多级流, 故障诊断, 发电系统 Thermal Power Generation System Fault Diagnosis Method * Based on Multilevel Flow Models 1,2 2 1 GU Xiaojun , YANG Shixi , QIAN Suxiang 1. College of Mechanical Engineering, Jiaxing University, Jiaxing 314001, P.R.China E-mail: guxiaoj un60@ 2. Department of Mechanical Engineering, Zheji ang University, Hangzhou 310027, P.R.China E-mail: yangsx@zj Abstract: The increasing complexity of modern thermal power system, so that all the coupling between the subsystems and equipment, increasing correlation. A single device failure will cause a chain reaction of multiple devices, an increase of fawlt diagnosis more difficult. To identificate the system failure source for making up the fault diagnosis method based on single equipment of complex coupled system deficiencies, this paper has studied thermal power generation system by building the Multilevel Flow Models(MFM) and analy