螺旋铣孔末端执行器公转组件的多目标优化设计.pdfVIP

2015年9月 机 床 与 液 压 Sep . 2015 第 43 卷第 17 期 M A C H I N E T O O L 3 H Y D R A U L I C S Vol . 43 No . 17 D O I ： 10.3969/j. issn. 1001-3881. 2015. 17. 033 螺旋铣孔末端执行器公转组件的多目标优化设计 张凯 (南京信息职业技术学院工程中心，江苏南京210023) 摘要：为了提高飞机轻型自动制孔系统加工精度与效率，制孔末端执行器质量要尽可能轻，同时需具有较高的抗震 性。以一种新型的螺旋铣孔末端执行器公转组件为研究对象，在有限元模态分析的基础上，以公转组件的前4 阶加权固有 频率和质量为目示函数、组件关键尺寸为设计变量建立了多目示优化数学模型。运用响应面法和正交试验，建立了公转组 件多目标优化的二阶响应模型，通过任取4 组响应面预测值与有限元模型计算值对比分析，考察了所建模型的准确性。基 于公转组件的响应面模型，进行了设计变量的寻优求解，实现了螺旋铣孔末端执行器公转组件的前4 阶固有频率分别提高 了 9. 18%、5.43%、41.26%、49. 17%，麵降低了 17%。 关键词：响应面法；螺旋铣孔末端执行器；模态分析；多目标优化设计 中图分类号：TP 242 文献标志码：A 文章编号：1001-3881 (2015) 17-132-5 Multi-object Optimization Design for Revolution Assembly of Orbital Drilling End Effector Z H A N G Kai (Nanjing College of Information Technology ， Nanjing Jiangsu 210023，China ) Abstract ： To enhance the machining precision and efficiency of lightweight automatic-holemaking-system for aircraft industry ， end effector for generating holes must have high vibration resistance ，and its mass should be as light sembly of new orbital-drilling-end-effector as research object ，a multi-objective optimization matliematical model sembly was establislied by finite element modal analysis. In the optimization model ，the first four order tion asembly and the mass were selected as the objective functions and the geometric dimensioning of key parts sign variables. Based on response surface method and orthogonal experimental design ，the second lution assembly was built. The accuracy of the response model was verified by comparing model and calculated value resulted from finite element model. The optimal solution of revolution assembly multi-objective