不同界面处理方法的自密实混凝土加固框架节点抗震性能试验研究.pdfVIP

第 30 卷第 4 期 Vol.30 No.4 工 程 力 学 2013 年 4 月 Apr. 2013 ENGINEERING MECHANICS 89 文章编号：1000-4750(2013)04-0089-08 不同界面处理方法的自密实混凝土加固框架节点 抗震性能试验研究 吴文达，郑建岚 (福州大学土木工程学院，福建 福州 350108) 摘 要：通过 5 个自密实混凝土加固框架中节点和 1 个整浇的对比框架节点进行二次受力下自密实混凝土框架节 点的拟静力试验，研究不同界面处理对自密实混凝土加固节点抗震性能的影响。5 个加固试件的界面分别采用了 凿毛法、刻槽法、凿毛加刻槽法以及凿毛加植筋法等 4 种方法进行处理。通过对试件破坏过程、新老钢筋应变、 荷载位移滞回曲线等试验结果的分析得到：4 种界面处理方法均能使自密实混凝土与老混凝土具有较好的协同工 作性能，而采用凿毛法与刻槽法相结合或凿毛法与植筋法相结合的加固节点其极限承载力、极限位移、位移延性 系数等较单独采用凿毛处理或刻槽处理的效果明显提高，而极限承载力已接近整浇对比试件。 关键词：框架节点；自密实混凝土；加固；界面处理；抗震性能 中图分类号：TU375.4 文献标志码：A doi: 10.6052/j.issn.1000-4750.2011.12.0832 EXPERIMENTAL STUDY ON SEISMIC PERFORMANCE OF FRAME JOINTS STRENGTHENED BY SELF-COMPACTING CONCRETE CONSIDERING THE INFLUENCE OF INTERFACE TREATMENT WU Wen-da , ZHENG Jian-lan (College of Civil Engineering, Fuzhou University, Fuzhou, Fujian 350108, China) Abstract: Five frame joints strengthened by self-compacting concrete and one integral casting joint for comparison were prepared. Static tests using MTS servo loading system were carried out to these joints under secondary loads to study the influence of 4 different interface treatments on the seismic performance. Interface treatments of the five strengthened specimens were chiseling-grossness, cutting groove with different groove density, combination of chiseling and cutting groove, and combination of chiseling and planting short reinforced bars The results of damage process, strains of both the old steel and new steel and the load-displacement hysteresis loops were obtained. It is found that all t