钢筋混泥土梁单元双非线性分析的共旋坐标法.docVIP

钢筋混泥土梁单元双非线性分析的共旋坐标法 　　（1. 湖南大学 土木工程学院，湖南 长沙 410082；2. 长沙理工大学 土木与建筑工程学院， 湖南 长沙 410076） 摘 要：针对已有的钢筋混凝土梁单元非线性分析模型采用较多的假定和近似从而导致计算量增大及计算精度下降的问题，基于共旋坐标法建立了考虑材料和几何非线性的任意截面钢筋混凝土梁的数值分析模型.首先利用虚功原理计算共旋坐标系下完全粘结钢筋混凝土梁考虑材料非线性的切线刚度矩阵，再通过结构坐标系与共旋坐标系下节点力之间及节点位移之间的总量关系及微分导出的增量关系，最终获得钢筋混凝土梁在结构坐标系中考虑几何与材料双重非线性的切线刚度矩阵.算例结果表明，本文算法可减少计算量、不累积误差、精度高. 　　关键词：钢筋混凝土； 梁单元；共旋坐标法；双非线性；微分法；切线刚度矩阵 　　中图分类号：TU323.3 文献标识码：ACorotational Procedure for the Binonlinear Analysis 　　of Reinforced Concrete Beam Element 　　DENG Jihua1，2， SHAO Xudong1 　　（1. College of Civil Engineering， Hunan Univ， Changsha， Hunan 410082， China； 2. School of Civil 　　Engineering and Architecture， Changsha Univ of Science and Technology， Changsha， Hunan 410076， China） Abstract：Multiple assumptions and approximations in nonlinearity analysis models of existing reinforced concrete beam element result in low calculation efficiency and low calculation accuracy. In this paper， based on corotational procedure， a numerical model for a given section considering material and geometrical nonlinear analysis of reinforced concrete beam element was developed. Firstly， by means of virtual work， a tangent stiffness matrix for the material nonlinearity of perfectlybonded reinforced concrete beam element was derived in corotational coordinate system. Then， by building total and incremental relationships derived from differential equations of nodal displacements and forces between global coordinate system and corotational coordinate system， respectively， tangent stiffness in global coordinate system reinforced concrete beam element was developed by considering geometric and material nonlinearity. A comparison between the results in this paper and those from existing references has demonstrated that the algorithm developed is highly efficient and accurate with many advantages， such as noncumulative calculation errors and reduction in computation. 　　Key words：reinforced concrete； beam element；corotational procedure；binonlinear；variationa