软件开发YCDM1_4_1_4_项目验收报告（英文）.docVIP

ＸＸＸＸ System Confidential __________PROJECT dEVELopment Check and Accept Report Building date: 2011-5-2 Editing date: 2011-5-2 File Control NO: UF_XX(NC/U8/U9/HR/DRP/CRM/PLM/OTH)_XX(Project NO)-01(Phase No)_XXX(Serial NO) Author: XXXX Customer Project Manager： Date： UFSOFT Project Manager： Date： File Information Project No No File NO File No Project Name Name Title Type （Maintain File、Requirement File、Design File、Check File 、Develop File） Current Phase Require Plan、Analysis Design、System Architecture、Deploy、Persist Abstract Current Version V1.0 Date 2011-05-2 Auther Name Owner Acceptor File UFDEV_PHASE_5_1_4_项目验收报告(英文).doc Edit History Date Version Author Edit Content Audit No Update NO CONTENTS 1. Check and Accept procedure 5 2. Ｓelf-inspection 5 3. Check and accept reference 6 4. Check and accept contents and procedure 6 5. Testing 7 6. Check and Accept conclusion opinion 7 7. Project Check and Accept Application Form 8 Check and Accept procedure Project’s check and accept should base on formal check and accept procedure. Both party carry out check and accept phase which is based on project contract and relative document, follow by below steps: Ｓelf-inspection Self-inspection content Self-inspection of corporation can be divided into two items, First, Function check and accept, second, project check and accept. Function self-inspection refer to multi-language check and accept, project check and accept refer to whole project contract inspect, which should be handled by project manager Xu Yi. Function check and accept Function module handler should submit check and accept application form to project manager, set down testing plan. Project manager should in charge of organizing check and accept group and QC team, according to contract to carry out testing plan. QC team carries out testing and working out testing conclu