Data preparation for digital modelling of the coal seams in the South Moravian Lignite Coalfield (Czech part of the Vienna Basin).docVIP

Acta Montanistica Slovaca Ro?ník 13 (2008), ?íslo 4, 491-501 P?íprava dat pro digitální modelování uhelnych slojí v jihomoravském lignitovém revíru (?eská ?ást vídeňské pánve) Kerstin Hoňková , Franti?ek Staněk , Josef Honěk a Jan Jelínek 1 2 3 4 Data preparation for digital modelling of the coal seams in the South Moravian Lignite Coalfield (Czech part of the Vienna Basin) In the contribution data preparation for digital modelling and assessing the Kyjov Seam (Pannonian, zone B of the Vienna Basin stratigraphy) and the Dub ňany Seam (Pannonian, zone F) is presented. The seams occur partly as unit seam and partly as seam split in up to four benches. Almost 3000 holes were drilled in the area in the last 50 years. Data about lithological logs, laboratory results and other measurements were gathered, uniformed, and stored in digital database. Input data for modelling, which were the thickness and average values of analytical parameters in set thickness in each data point (drill hole), were derived from the primary data stored in database by designed software. The thickness was defined in five ways in each drill hole. Firstly as the geological thickness to model natural geometry of the seam and secondly as deposit thickness to model only part of the seam with required quality. Deposit thickness was defined in four variants according to limit parameter of maximal average ash content value of 50, 40, 35, and 30 % in the seam in borehole. Key words: the South Moravian Lignite Coalfield, database, coal seam modelling, estimation of coal reserves, economical thickness. úvod Základem moderního hodnocení lo?iska nerostné suroviny je vytvo?ení digitálního modelu lo?iska a jeho následné vyhodnocení. V rámci projektu GA ?R ?. 105/06/1264 zamě?eného na vzorové hodnocení uhelného lo?iska byly ukázkově modelovány lignitové slo