下承式钢管拱桥--空间倾斜系杆拱拱肋吊装技术.pdfVIP

学兔兔 80 桥梁建设 2010年第6期 文章编号：1003～4722一(2010)06—0080—04 下承式钢管拱桥 空间倾斜系杆拱拱肋吊装技术 辛俊红 ，杨 超 (1．太原市市政公用工程质量监督站，山西太原030012； 2．中铁大桥局第三工程有限公司，广东 广州510800) 摘 要：太原南中环桥主桥为主跨 180 m的下承式倾斜钢管拱结构，主、副拱向外侧倾斜。钢 管拱采用大型履带吊机配合支架法施工，吊装顺序为先上游侧后下游侧，先主拱再副拱。每条拱肋 划分为5个吊装节段和 1个嵌补段。为方便吊装及安装就位，吊装前，通过计算确定吊点位置与吊 绳长度。由于是倾斜起吊，吊装时须进行2个方向的旋转，首次栓绳使拱肋由水平横卧旋转至竖 直，二次拴绳使拱肋由纵向水平旋转至需要角度。在气温较低的时段吊装嵌补段。施工中重点注 意吊装安全及线形控制。实践证明该桥的吊装技术切实可行。 关键词：拱桥；下承式桥；系杆拱；拱肋；吊装；桥梁施工 中图分类号：U448．22；U445．46 文献标志码：A Hoisting and Installing Techniques for Arch Ribs of Spatially Inclined Tied Arches of a Through Steel Tube Arch Bridge XIN Jun-hong ，YANG Chao。 (1．Taiyuan City Quality Supervision Station of Municipal Engineering，Taiyuan 030012，China；2．The 3rd Engineering Co．，Ltd．，China Railway Major Bridge Engineering Group，Guangzhou 510800，China) Abstract：The main bridge of the South Middle Ring Road Bridge in Taiyuan City is a through steel tube arch structure with a main span 1 80 m and the main and auxiliary arch ribs of the structure are inclined outwards．The arch ribs were hoisted and installed by large caterpillar crane by the aid of scaffolding．The procedures of the construction were that the arch ribs on the upstream side were hoisted and installed first and the ribs on the downstream side late。the main arch ribs first and the auxiliary ribs late．Each arch rib was divided into 5 blocks plus a built—in block．To facilitate the hoisting and installing of the rib