澜沧江特大桥提篮拱竖转施工方案比选.pdfVIP

学兔兔 澜沧江特大桥提篮拱竖转施工方案比选 张爱花 79 文章编号：1003—4722(2010)03—0079—04 澜沧江特大桥提篮拱竖转施工方案比选 张爱花 (中铁大桥局施工设计事业部，湖北 武汉430050) 摘 要：澜沧江特大桥为上承式劲性骨架钢管混凝土铁路提篮拱桥，主跨计算跨径342 m，桥 址处于V形深沟峡谷地带，相对高差达1 204 m。设计要求该桥采用转体法施工，半拱竖转下放重 量达2 500 t，根据该桥特点及地形条件，提出整体竖转和二次竖转2种施X-方案，经研究比选，该 桥采用拱肋二次竖转施工方案，依山就势设置拼装支架，半边拱肋分2段拼装，2次竖转到位。二 次竖转施工方案的关键施工技术有半拱中部的中间铰设置、第1次竖转水平力传递拉压杆结构及 计算机动态同步控制负角度竖转技术。 关键词：澜沧江特大桥；铁路桥；拱桥；转体法架桥；二次竖转；桥梁施工；方案 中图分类号：U448．2；U445．4 文献标志码：A Comparison and Selection of Construction Schemes for Vertical Rotation of Basket Handle Arch of Lancang River Bridge ZHANG Ai-hua (Division of Construction Design Undertakings，China Railway Major Bridge Engineering Group Co．，Ltd．，Wuhan 430050，China) Abstract：Lancang River Bridge is a concrete—filled steel tube(CFST)steel frame reinforced concrete railway basket handle deck arch bridge with the calculated length of main span being 342 m．The bridge is located over the V—shape deep valley where the relative height difference is up tO 1 204 m．According to the design，the arch ribs of the bridge were required tO be erected by the vertical rotation method．The weight of the rotation and lowering of a half arch rib would be up to 2 5 00 t．In the light of the characteristics of the bridge and the topography conditions at the bridge site，two kinds of the constructions schemes of integral vertical rotation and tWO—time ver— tical rotation were proposed．Through comparison and selection，it was decided that the scheme of the two-time vertical rotation was to be adopted．The scaffoldings for assemb