质量检查试题(国外英文资料).docVIP

质量检查试题 The regulations on the management of the test of construction engineering tests (there are only one correct answer for each of the four choices.) The management and management of the test of building project (JGJ 190-2010) : the organization management and implementation of the site test for construction project shall be responsible for (B). A, supervision unit B, construction unit C, construction unit D, design unit 2, construction engineering testing technology management specification (JGJ 190-2010) : (C) must be to testimony of witness sampling and inspection process, and must ensure the authenticity of the witness sampling and inspection process. A, the technical director B, the sample personnel C, witness personnel D, the supervision engineer (A) to ensure the accuracy and accuracy of the test data and the reports. A, the inspection agency B, the quality supervision organization C, the construction unit D, the supervising unit The construction site should establish a perfect test management system, and the construction project (D) should be organized to check the execution of the test management system. A, B, project manager C, production manager D, technical director 5, after the completion of the external thermal insulation engineering construction period, and h (A), and the ambient air temperature at the grass-roots level shall not be less than () ℃. A, 24, 5, B, 24, 10, C, 12, 5 D, 12, 10 6, construction test plan should be in front of the engineering construction by construction projects (D), organize relevant personnel and shall be submitted to the supervision units to review and supervise the implementation. A, B, project manager C, production manager D, technical director (B) shall be held by a professional technician with knowledge of construction construction testing. Technical director B, sample personnel C, witness personnel D, supervisor engineer When the witness is changed, the relevant unit shall be notified to handle the written change