主机13t（国外英文资料）.doc

主机13t（国外英文资料） Problem 1: the purpose of diesel engine is (). The host is in constant use B. the emergency equipment is at work C. the power unit is in constant use D. the auxiliary equipment is in constant use Answer: C Problem 2: diesel engine preparation includes (). Ⅰ. Proofread the clock with the steering gear Ⅱ. Prepare Ⅲ warm-up with each system. Open the emergency bilge suction valve Ⅳ. Transfer, car and commissioning A. Ⅰ + Ⅱ + Ⅲ B. Ⅰ + Ⅱ + Ⅳ C. Ⅱ + Ⅲ + Ⅳ D. Ⅰ + Ⅲ + Ⅳ Answer: B Problem 3: most of the preheating methods used in the modern Marine engine warm-up are adopted (). A. steam heating main engine circulating water tank B. electric heater heating main engine cooling water Heat the cooling water in the tank D. Diesel engine cooling water heats the main engine Answer: D Problem 4: the method of engine heating cylinder has (). Ⅰ. Power diesel engine cooling water circulation within the host Ⅱ. Steam heating temperature and start the pump in the expansion tank Ⅲ. Steam heating or electric heater host freshwater and start fresh water pump A. Ⅰ + Ⅲ B. Ⅰ + Ⅱ C. Ⅱ + Ⅲ D. Ⅰ + Ⅱ + Ⅲ Answer: D Problem 5: the engines heating machine includes (). Preheat preheat Ⅱ Ⅰ. Cooling system. The fuel system Ⅲ. Preheat Ⅳ lubricating oil system. The cylinder oil preheating A. Ⅰ + Ⅱ B. Ⅰ + Ⅲ C. Ⅱ + Ⅲ D. Ⅱ + Ⅳ Answer: B Problem 6: the usual way to preheat the lubricating oil system in a large Marine diesel engine is (). A: start the oil separator and heat up the oil Heat up the steam in the oil circulating cabinet C. warm up the electric heater in the oil circulating cabinet Turn on the lubricating oil pump to warm up steam in the piping Answer: A, Problem 7: note that the following error handling in the prepared car for the cooling system is (). A. open cylinder jacket fresh water pump Turn on the seawater circulating pump Turn on the piston cooling pump Open the injector cooling pump Answer: B Problem 8: it is () that the following items in the standby vehicle are not in the