接口与通讯技术（国外英文资料）.doc

接口与通讯技术（国外英文资料） Job title: interface and communication technology in the fall of 2012 Objective: 100 points Note: objective is the problem that can be automatically divided by choice, multiple-choice, non-problem, etc. Detailed information: Problem number: 1: choice question (please choose the only correct answer in the following choices) : 4 Content: There is a basic working method for serial communication. 2 A, A. B, B. 4 C, C. D, 1 D. Students answer: a. Correctness: correct Problem number 2: a single choice (please select the only correct answer in the following choices) : 4 Content: Serial communication is primarily used for (). A, close communication system B, telecommunication system C, parallel communication system D, LAN communication system Students answer: B Correctness: correct Problem number: 3: a single choice (please select the only correct answer in the following choices) : 4 Content: When the serial asynchronous data is sent, if the format specifies eight bits of data, and two to stop bits, a set of asynchronous data has a common () bit. 8 A, B, 10 C, 11 D, 12 Students answer: D Correctness: correct Title 4: a single choice (please select the only correct answer in the following choices) : 4 Content: The 8251 chip is an ___. A, a. parallel interface chip B. serial interface chip C, the C.D MAC D, d. interrupt control chip Students answer: a. Correctness: correct Title 5: a single choice (please select the only correct answer in the following choices) : 4 Content: The interval between serial asynchronous communication adjacent to two frames is (). A, arbitrary B, sure C, 0 D, it has to do with the baud rate Students answer: a. Correctness: correct Problem number 6: a single choice (please select the only correct answer in the following choices) : 4 Content: Compared with synchronous communication, the advantage of asynchronous communication is (). A, receiver/sender can use their separate receiver/transmitter clock B, send and receive both parties do