公铁步履双梁架铺机的毕业.docxVIP

摘要公铁步履架铺机是架设桥梁大型关键施工设备，主要由纵导梁、前辅助顶杆、前支腿、中支点装置、后支点装置、横导梁纵移台车、横导梁、吊梁行车、横移轨道、液压系统、电器控制系统、发电机组等组成。在这片毕业设计论文中，主要介绍了公铁步履架桥机机架部分的构造与设计理论和设计方法。首先详细制定架桥机机架部分的设计方案，根据设计准则和一般要求，初步确定架桥机的形状和尺寸。然后根据机架的制造数量、结构形状及尺寸大小，初步制定工艺。最后根据理论力学和材料力学等相关的力学知识，结合架桥机的载重要求，对架桥机机架各个部分进行详细的受力分析和校核，确保架桥机在工程施工时的可靠性。本文内容系统新颖、详略得当图文并茂，有一定的实用价值。关键词：架桥机、机架、横导梁、纵导梁AbstractWalkingframe shop machine a highway and railway bridge key construction equipment, mainly by the longitudinal guide beam, the former auxiliary mandrel, the first leg, the fulcrum of the device, after the fulcrum device, horizontal guide beam longitudinal shift car, the horizontal guide beam, hangingdriving beam, sliding track, hydraulic systems, electrical control systems, generator sets and othercomponents.This paper introduces the public and iron machine rack part of the walking bridge construction and design theory and design methods. First elaboration of part of the design of erecting machine rack, in accordance with the design criteria and general requirements, initially to determine the shape and size of the bridge machine. Then rack manufacturing quantity, structure, shape and size, the initial development process. Finally, according to the theory of mechanics and mechanics of materials and other related mechanical knowledge, combined with the load requirements for erecting machine, detailed stress analysis and verification of each part of the rack of erecting machine, to ensure the reliability of the bridge machine construction . In this article novel system, appropriate levels of detail illustrated, there are some practical value.Keyword: bridging machine；boy frame system of bridge；Horizontal guide beam；Longitudinal guide beam第1章 绪论1.1 选题背景及其研究意义早期的中国铁路是客货共运，既有线旅客列车提速后，客货列车速差增大，影响了线路的通过能力，而且既有线提速受线路平面技术条件的限制，提高到一定速度后，工程投资将急剧增加，甚至超过新建铁路。因此，铁道部决定实现客货分流，提高铁路运输能力和运输质量。客运专线是实现客货分流的重要手段，已是国家规划之中的内容，为适应客运专线快速的要求，高速行驶的车辆要求铁路桥梁具有较大的抗弯和抗扭刚度，而双线整孔简支箱梁具有受力简单、形式简洁，外形美观、抗扭剐度大、使用中养护工作量小以及噪音低等优点。由于在铁路客运专线设计中桥梁比例增大，而其中8096以上又将采用中、小跨度桥梁，即采用整孔预制的