建筑开槽（Construction slot）.docVIP

建筑开槽（Construction slot） The description is not clear enough. I have a bottom in my mind Requirements for construction conditions: 1. Prior to excavation, the land shall be cleared and disposed of in the area under the construction plan according to the requirements of the construction plan. 2. The positioning control line (pile), standard level pile and gray line size of the building or structure of the building or structure must be inspected and qualified; And complete the procedure of pre-inspection. 3. Adequate lighting facilities should be used during night construction; A clear sign should be set in the dangerous lot, and the excavation sequence should be arranged reasonably, so as to prevent the wrong digging or digging. 4. When excavating underground water level foundation pits and pipes, the underground water level shall be reduced according to the local engineering geological data. Generally, it should be reduced to 0.5m below the excavation surface before excavation can be made. 5. The roads, Bridges and unloading facilities of the construction machinery entering the site shall be inspected in advance, and the preparation work shall be strengthened or widened if necessary. 6. Choose the earth moving machinery, should according to the topography of the construction area and the operation conditions, the type and thickness of soil, total quantity and time limit for a project comprehensive consideration, to exert the efficiency of construction machinery to determine, good construction scheme. 7. The layout of the operation route of the construction area shall be determined according to the size of the work area, mechanical performance, distance and topographic relief. 8. It shall be equipped with manual operation in the areas where the mechanical construction is unable to operate and the slope of the slope and the bottom of the cleaning groove. Familiar with drawing and technical background. Process flow: The order and slope of the excavation are determined D