石墨加工（Graphite processing）.docVIP

石墨加工（Graphite processing） Graphite; Milling; The processing technology 1, the preface Graphite is very common in the production and living a black non-metallic materials, density is lower still has high temperature resistance, conductive thermal conductivity, lubricity, chemical stability, plasticity, the nature of the excellent thermal shock resistance, and so on. And because it belongs to the six square crystals, the joint force between the layers is weak, the internal porosity is large and the tensile strength is low, so the mechanical processing performance of graphite is very good. According to its different characteristics, its use is also very broad, for example, according to its chemical stability can be made into ink, pencil core and so on; According to its high temperature resistance can be made into gold grinding tools; According to its conduction, thermal conductivity can be made into electric machine tool electrode and so on. Graphite parts of complex structure and high accuracy requirement, and the quality request is higher, generally in due to the above characteristics, caused in processing edge serrated, slag and avalanche Angle quality of unqualified phenomenon. 2. Tool selection The correct choice of tool directly determines the efficiency and quality of processing. Therefore, we must choose reasonable and effective cutting tools if we want to control the quality of processing effectively. For example, the graphite material itself is relatively easy to cut, so the products with high surface precision and cost control can be used with high steel cutting tools. The cutting performance of the cutter directly determines the processing quality, machining efficiency, and the durability of the tool, so it is necessary to make a reasonable selection of the tools material. The hardness and toughness of the tool are contradictory, the higher the hardness, the better the wear resistance, but the lower the toughness, the more brittle the texture. At the same t