变压器Corona location in transformers by radio frequency spectrum analysis II application of technique and results of measurements.pdfVIP

IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, VOL. PAS-89, NO. 7, SEPTEMBER/OCTOBER 1970 1591 CORONA LOCATION IN TRANSFORMERS BY RADIO FREQUENCY SPECTRUM ANALYSIS II. APPLICATION OF TECHNIQUE AND RESULTS OF MEASUREMENTS R. T. Harrold Westinghouse Research Laboratories Pittsburgh, Pennsylvania 15235 ABSTRACT This paper gives a detailed account of the practical application fashion to the NEMA8 corona measurements. of the technique of corona location in transformers by radio fre- quency spectrum analysis. The measurements are similar to the usual As with most electrical corona location techniques, it is de- NEMA corona measurements taken at the bushing tap with a radio sirable to know that measurements at both transformer terminals noise meter, except an X-Y recorder is used to plot the corona originate from the same corona source. This may be accomplished by frequency spectrum and a current probe used at the neutral. The feeding the pulses detected at the terminals to an oscilloscope to- theory outlined in Part I is verified by extensive measurements taken gether with a 60 hertz reference voltage, and observing whether the from a model transformer using a pulse generator to represent a corona pulse measured at each terminal occurs at the same position corona source, and by computer analysis of simulated transformer on the 60 hertz wave. Also information on the corona pulse polarity networks and by practical results. at the terminals is useful for assessing whether corona is occurring