全现浇大模板工程施工工艺（Construction technology of full cast in place large formwork）.doc

全现浇大模板工程施工工艺（Construction technology of full cast in place large formwork） Bufenbuqi, not determined to learn. Qu Zequan is straight. There are horses, and maxima. A thousand li is often there, but Bole seldom. Noisy as mixed shells, pearls falling into a jade plate. The process standard is applicable to the whole cast in place large scale formwork of ceramsite, pumice lightweight aggregate and ordinary sand lightweight aggregate concrete. 2.1 materials and main equipment: 2.1.1 lightweight aggregate: Pumice: maximum particle size should not be greater than 20mm, not allowed to contain more than two times the maximum particle size. Grading requirements for the 5mm through the screen is not more than 90%, through the 10mm screen for 30% to 70%; through the 200mm mesh is not greater than 10%. Void ratio is not greater than 50%, water absorption ratio of 1H is not greater than 25%, mud content is not more than 2%, loose density, cylinder pressure strength meets the design requirements. Ceramsite: the same as the above requirements, and shall not mix with inclusions or clay blocks. 2.1.2 sand: medium sand or coarse sand, containing mud, when the concrete strength grade is C10 ~ C30, not more than 5%, when the concrete strength grade is greater than C30, not more than 3%. 2.1.3 cement: No. 325, No. 425 slag Portland cement or ordinary Portland cement. 2.1.4 admixture: product quality certification, dosage must be determined by the laboratory, technical performance compliance with the relevant standards. 2.1.5 main equipment: mixer, bucket, trolleys, scales, pervibrator, shovel, iron plate, wood trowel, Xiaoping spade, small spoon, buckets, water pipes, rubber additive metering vessel. 2.2 operating conditions: The 2.2.l approach raw materials including cement and light aggregate and admixture when the inspection certificate, the technical performance indicators must meet the requirements, and shall reinspect the lightweight aggregate, each for a group of 2003 (less than