吹膜技术小窍门 - 薄膜之家（Blown film technology tips - film home）.docVIP

吹膜技术小窍门 - 薄膜之家（Blown film technology tips - film home） Blowing technology tips: Blown film is actually a kind of film between the biaxial oriented film and the casting film. The biaxially oriented film can be produced by blow expansion method, so that the orientation ratio of the two directions can be approximately the same if the temperature is appropriate and the ratio of blow up ratio and traction ratio is appropriate. When the expansion film is produced, if the traction speed is too high, the difference between the expansion ratio and the expansion ratio is too large, which may lead to vertical orientation and transverse orientation Blown film technology tips: inflatable film is actually a kind of film between the biaxially oriented film and the casting film. The biaxially oriented film can be produced by blow expansion method, so that the orientation ratio of the two directions can be approximately the same if the temperature is appropriate and the ratio of blow up ratio and traction ratio is appropriate. When the blown film production, if the traction speed is too fast, too much with the blowing ratio, it may produce longitudinal orientation and transverse orientation is too large, the tensile process like production split fiber as the transverse strength is low, easy to break. The prevention method is to decrease the traction speed properly, to match the blow up ratio, to increase the air volume of the air ring, to make the expanded film cool rapidly, and to avoid stretching at higher temperatures. Take the 80 film blowing machine as an example: (model is different, specifications are also different) In the first part, the feed heating zone is divided into 5 areas: The rod diameter (6CM diameter), shell 8, 7CM, 11kw (host) motor drive. One or two and three heating zones are started at the inlet. The next turn, four heating zones of parts called three, 1 through three, 2 change net exports, 3 five. Fifth heating zone, that is, the discharge area, through the 3