recent progress in surface modification of polyvinyl chloride在表面改性聚氯乙烯的最近进展.pdfVIP

Materials 2012, 5, 2937-2959; doi:10.3390/ma5122937 OPEN ACCESS materials ISSN 1996-1944 /journal/materials Review Recent Progress in Surface Modification of Polyvinyl Chloride Ahmad Asadinezhad 1, Márian Lehocký 2,*, Petr Sáha 2 and Miran Mozetič3 1 Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran; E-Mail: a_anejad@ 2 Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Zlín 76001, Czech Republic; E-Mail: saha@utb.cz 3 Plasma Laboratory, Department of Surface Engineering, Jožef Stefan Institute, Jamova Cesta 39, Ljubljana SI1000, Slovenia; E-Mail: miran.mozetic@guest.arnes.si * Author to whom correspondence should be addressed; E-Mail: lehocky@post.cz; Tel.: +420-608-616-048; Fax: +420-576-031-444. Received: 26 September 2012; in revised form: 11 December 2012 / Accepted: 11 December 2012 / Published: 18 December 2012 Abstract: Surface modification of polymers has become a vibrant field of research on account of a myriad of rationales which stimulated numerous efforts. The current paper serves as a condensed survey of the advances made through different approaches adopted for tuning the surface properties of polyvinyl chloride as a homopolymer extensively used on a large scale. Though it does not address all challenges involved, this paper communicates and highlights, through concise discussion, the findings of the efforts undertaken in recent decade