电脑散热（Computer cooling）.doc

电脑散热（Computer cooling） CPU hardware cooling method The above heat dissipation methods are basically spending money, and the free hardware cooling method of heavy play lies in two points: dust removal, grease and grease. Through these two simple and effective free method, but also to achieve the purpose of cooling CPU cooling. CPU radiator is mainly composed of heat sink and cooling fan two major parts. Usually, the cooling fan in the case will absorb dust while cooling down, and dust is the enemy of the electronic equipment. Dust accumulation on the surface of CPU can cause short circuit faults and even burn down. In addition, bearing clearance and CPU fan too much dust will be blocked between the heat sink and hinder the ventilation and heat dissipation, noise increases, reduce the cooling effect, and ultimately the strike and damage the CPU fan, so through the radiator to dust decontamination, add oil and fat, can improve the performance and recovery of the radiator. Tool section There is a saying that if a worker wants to do something good, he must first sharpen his tools. Before cleaning to be ready for the weapon includes: cross screwdriver, soft brush or cotton swab and waste toothbrush, toothpicks, lubricating oil, thermal grease, alcohol, and a basin with warm water and mild detergent (Figure 1). Cleaning tool removing radiator The cross screwdriver to open the case, soft brush to remove the radiator surface dust, cotton swabs, toothpicks and alcohol to clean the cooling fan and radiator fan, groove and other details, lubricating oil and cooling paste respectively to fan motor, CPU parts are added, with a neutral cleaning agent, a bowl of warm water can be used to soak cleaning fins, buckle etc.. Neutral detergent can be replaced by ordinary detergent. DJ Java Decompiler 1. dust removal After the necessary tools are ready, the cleaning work can begin. Remember to turn off the power supply first, then unplug the power cord and all the peripheral connections.