材料做法74（Material practice 74）.docVIP

材料做法74（Material practice 74） 2, specific engineering practices and building materials used: 1) roofing: (1) the form of roof drainage The structure of reinforced concrete frame and masonry should give priority to the organization without drainage, cornice pick length should be decided by compute, generally not less than 600mm; a high of more than 10 meters and a larger catchment area can be considered by organized internal drainage, rainwater pipes in the room, the wall is arranged at the rainwater pipe elbow, pipe from the outdoor water height 150mm. (3) color profiled steel sheet roof The indexes of color coating steel plate should be consistent with the GB/T color coating plate and strip the provisions of 12754-2006, building color coated steel plate galvanized layer of double quality than 180g/m2, color steel plate should be consistent with the provisions of the GB/T12755-2008 building with profiled steel sheet. The roofing pressed steel plate and composite thermal insulation board with heat preservation requirements are compounded on site. The roof adopts the outer plate YW75-760, the steel plate thickness is 0.8mm, the inner plate YW28 - 750, the steel plate thickness is 0.6mm. Plate filled with rock wool felt, according to the calculation to determine the thickness, choose 100mm thick rock wool felt this project (more than 1 hours fire resistance). The roof profiled steel sheet without heat preservation has a plate shape of YW75-760 and a substrate thickness of 0.8mm. Indoor steel structure small house surface: have heat preservation requirement, outer board adopts YW35-750, steel plate thickness 0.6mm, inner board adopts YW28-750, steel plate thickness 0.6mm, between inside and outside board is 50-100 mm wool rock roll felt. (4) roofing roofing of coiled material: choose 05J909 house 11 standard practice The roof waterproof grade is selected as grade III, the coiled material is made of 4 thick SBS modified asphalt roll. The waterproof grade of the main room