冷却水对冷水机综合效能的六种影响(Six influences of cooling water on comprehensive performance of water chiller).docVIP

  • 2
  • 0
  • 约1.2万字
  • 约 9页
  • 2017-10-05 发布于河南
  • 举报

冷却水对冷水机综合效能的六种影响(Six influences of cooling water on comprehensive performance of water chiller).doc

冷却水对冷水机综合效能的六种影响(Six influences of cooling water on comprehensive performance of water chiller)

冷却水对冷水机综合效能的六种影响(Six influences of cooling water on comprehensive performance of water chiller) In terms of running costs, the lower the condensing temperature and the greater the cooling coefficient, the smaller the power consumption when the evaporation temperature and the compressor revolutions are constant. According to estimates, each increase of condensing temperature is 1 degrees centigrade, the refrigeration capacity of the consumption rate increased by about 3%-4%. so, from this point of view, is beneficial to improve the cooling capacity of the chiller condensing temperature keep stable. But for this purpose, should take the following measures: to increase the heat exchange area and cooling water; or increase the heat transfer coefficient of the condenser, but for an air cooling system, increase the area of the condenser is almost impossible. The increase of cooling water in condenser water will increase the flow rate, which will affect the refrigerator life, a series of problems at the same time also increased the power consumption of cooling water pump and pipe waste, but the effect is not ideal. Increase the cooling tower type, can consider the surplus coefficient of a certain amount, but if blindly increase the cooling tower type, and with the aim of reducing the temperature of cooling water and cooling water temperature, The loss outweighs the gain., but also by the local meteorological parameter limit. Improving the heat release coefficient of the cooling water side of condenser is practical and effective, and the effective way to improve the exothermic system is to reduce the fouling thermal resistance of the water side, and to effectively treat the cooling water replenishment 2 cooling water replenishment problems The loss of water in cooling tower includes three parts: evaporation loss, wind blow loss and blowdown loss: Qm=Qe+ Qw+Qb Type: Qm is the cooling tower water loss; Qe is the water loss of Yan; Qw is the wind blow loss; Qb is the sewage wa

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档