高性能训练4.主警告.pptVIP

* Explain that a dual generator off annuciator will trigger a Master Warning and Master Caution * Note the lack of some annunciator lights * 1st click a question appears 2nd click the answer appears etc * 1st click a question appears 2nd click the answer appears etc * 1st click a question appears 2nd click the answer appears etc * 1st click a question appears 2nd click the answer appears etc * 1st click a question appears 2nd click the answer appears etc * 1st click a question appears 2nd click the answer appears etc * 1 Questions? 复习题 如果造成红色警告灯闪亮的原因解除（不是通过按复位键） ，那么 : 警告灯板上的警告灯会 熄灭 主警戒灯会 熄灭 主警告灯会 保持闪亮 复习题 如果双发动机警戒灯亮会触发 双主警戒灯和主警告灯 咨询灯能触发主警戒灯吗? 是的 在地面，减推板选择收上并且油门低于85％ 在空中，减推板未锁好灯亮 复习题 当旋转测试时，如何进行风档引气测试? 将风档引气电门选择 BLEED HI位, 检查 W/S AIR O’HEAT 信号灯亮并且4″后主警戒灯亮 将风档引气电门选择 BLEED LOW位, 检查 W/S AIR O’HEAT 信号灯亮并且4″后主警戒灯亮 复习题 当旋转测试中，选择火警位时? 将测试发动机火警回路的完整性。保证火警回路中的惰性气体没有泄露，在必要时可以触发火警 将 引起LH 和 RH ENGINE FIRE 灯亮 问题 * Introduce the class Describe how long it will last Describe how to find the information in the PTM * Read the objectives * Describe the location of the Rotary Test Switch Explain when the check is completed Explain that the avionics power should be turned on * Note that once the switch is selected out of “OFF” the TEST indication light illuminates red * Rotating clockwise the first position is fire warning Explain “continuity” Brief each bullet * Brief each bullet * Explain the bullet * Discuss each bullet Explain and show what occurs when AOA is selected Discuss the difference between the CJ and CJ1 EFIS AOA presentation * Brief the bullets * This slide is hyper linked Describe the location of the windshield bleed air switch Click on the BLEED HI position – this hyper links to an animated slide with new bullets – read the bullets and describe what happens Then click on the LOW position and once again it is hyper linked to an animated slide – read the bullets and describe what happens Finally click anywhere out side of the Bleed Air switch area and the present