分布式应用系统的编址解析与规约技术分析-addressing resolution and protocol technology analysis of distributed application system.docxVIP

AbstractDistributed application system has been widely used by virtue of its good performance. But with the continuous expansion of the system’s scale, the processing of ultra-large-scale data storage becomes a problem and the complexity and non-standardization of communication protocol leads to the mismatch between protocol and equipment which results in a waste of resource. To solve these problems, this thesis studies the principle of addressing resolution and communication protocol, designs addressing in specific application based on IPv6, designs and realizes the general functions of Polling protocol.The main research content of this thesis is as follows:Several concepts related to network communication are formally defined by set theory.In order to resolve the address shortage results from the increasing number of nodes, a new method of addressing on the basis of IPv6 is proposed. First, the characteristics of IPv6 and actual demand are deeply studied. Then, combined with the distributed naming system, the prefix of IPv6 address, planning space and the characteristics of application type are analyzed. Finally, a method of addressing based on naming is proposed.This thesis applies the naming system-combined IPv6 addressing method to Chord ring in the P2P network. First, IPv6 addresses are segmented by hash algorithm, then the finger table of the multi-ring structure is optimized and finally an improved Chord algorithm based on multi-ring and IPv6 is designed. Experimental results show that the improved algorithm can effectively reducing the number of average lookup hop count which improves the efficiency of resource querying while maintaining Chord’s other performance.This thesis summarizes the general functions of the various protocols and distributed applications and designs the general functions in a standard manner based on the characteristics of Polling protocol. And a real-time monitoring system of parcel is designed and realized, experimental results show