三相pwm整流器控制算法分析与应用-analysis and application of control algorithm for three-phase pwm rectifier.docxVIP

II II Abstract The traditional circuit of diode rectification’s power factor can’t be adjusted and its’ output value can’t be adjusted too.So a large number of harmonics is poured in the system leads the power factor low and a great pollution on electric fence.The most useful method to eliminate this pollution is adjust the current of line side to be sine. PWM rectifier came out at 90th of last century which based on pulse-width modulation.Because the current’s waveform of AC side is sine with low harmonic content,high power factor and its energy bidirectional flow,so it is widely used in a lot of areas in national economy.Through the PWM rectifier’s characteristic of four quadrant operation,it is easy to see that if the voltage’s value of AC side is big enough, AC side’s voltage can be controled to make the system to get an idea output characteristic in four quadrant operation.The voltage and current can be maked with a same phase so that the reactive power and harmonic can be removed. Three phase PWM rectifier’s Nonlinear control method is researched here in order to obtain a good performance on response time, anti-jamming ability and make the power factor of PWM rectifier can be adjusted.The research content will be shown as follows: In order to get the ideal result, PWM rectifier’s math model has been buid.The idea of switching function is introduced and the system‘s math model is builded based on three-phase static frame of axes and then transform the equation based on three-phase static frame of axes to the equation based on the two -phase rotating coordinate system with PARK transform. Found this math model is strong coupling and non - linear characteristics. The linear control methods can’t get a good result. In order to control the phase and amplitude of current. Direct current technology is analyzed that include : hysteresis control and SVPWM control. Then these methods have been compared. At last PI control, VSC (variable structure control) and FVSC (Fuz