UG环境下板料冲压成形模拟后置处理系统研究-数字化材料成形专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II 以汽车地板为实例验证了后置处理系统的模拟效果，并将各种显示方法综合对 比，证明该系统能够应用于实际且具有良好的应用效果，并对下一步的工作与后处 理的发展方向提出展望。 关键词：板料冲压；数值模拟；等值线；UG 二次开发；后处理； FLD III III Abstract The research direction of the finite element simulation of Sheet forming is that combine CAE system into common CAD software. This method can avoid that the user shift between CAE and CAD environment. The post-processing system is an important part of the finite element simulation of Sheet forming, it will provide exchange from computed results and graphics, help the user to know about computed results clearly and accurately. So how to combine CAE post-processing system into common CAD software is hotspot of the research currently. The issue stems from two projects. The one is the important part of the project NSF (The Independent Research of High-speed Simulation and Optimal Process Design Aiming at the Formability of Automobile Panel.No, another is National Key Technology RD Program (No. 2006BAF01A43).The major work of this paper is that provide a post-processing system based on UG by using UG redevelopment function. The author studied the technique of UG redevelopment and post-processing system, prove that excogitate post-processing system based on UG in theory, and give project of system. Based on the study of finite element theory, the author developed the sheet metal forming simulation post-processing system based on UG., which includes four algorithm, element mode, contour mode, FLD mode and color mapping. Color mapping is based on RGB model. It creates a discrete color model in UG system and increase the effect of graphics display. Element mode uses the data of element directly to fill Element with corresponding color. It computes fast in post-processing system. The distributing of data in contour mode is emphases of the research, it base on trigonometry and compartmentalize the element more. This algorithm has a good effect of graphics when create contour, and it compute fast in po