桩—锚联合支护技术在合肥某深基坑中的应用与研究-application and research of pile - anchor combined support technology in a deep foundation pit in hefei.docxVIP

On Application and Research of Pile-anchor United Support Technology in a Deep Foundation Pit in Hefei ABSTRACT In recent years, with the rapid development of economy, cities are in the great development and construction. Tall buildings are springing up in city center; accordingly, the depth of foundation pits are adding constantly. For the past few years, China has constructed many large-scaled public facilities, which set forward new demand for underground space, so the deep foundation pit support project has received a great development in last 10 years. For it is difficult for the soil-nailing wall support system to control the transformation of structure and the sedimentation of surrounding buildings, and the cost of some support system, such as fully inside bracing and diaphragm wall support, is high, the soil-nailing wall support system is not widely used in Hefei. It has been found that the pile-anchor support system not only can avoid the transformation of soil-nailing wall, but also has the features of safety, economy and less impact, so it has been applied in the construction of city center where is surrounded by buildings efficiently. The deep foundation pit support technology involves the knowledge not only in geotechnical engineering but also in structural engineering, so the knowledge both in structural engineering and geotechnical engineering should be mastered by the researchers and the requirement for theoretical knowledge is high. Combining the theoretical research of pile-anchor united support technology and project case, the paper researches the working principles of pile-anchor united support system deeply; makes an optimization on the support plan; studies the problems of design and construction in actual project, and simulates the project with the FLAC3Dnumerical simulation software. By contrasting the simulated results and the actual survey results, the paper draws a conclusion that the results get from FLAC3D simulation is feasible in the