自锚式悬索桥缆索剖析计算.docVIP

自锚式悬索桥缆索剖析计算 　　 摘要：对于自锚式悬索桥结构来讲，主要承重构件是两根主缆。由于主缆是不可更换构件，所以当主缆架设完毕以后，其空缆和成桥状态下的线形和无应力长度是不可调整的，或者说调整量甚微。因此在施工过程中，必须准确的计算缆索系统的各项参数，以指导现场施工。 　　关键词：自锚式悬索桥；主缆；线形；无应力长度；缆索系统；参数 　　Abstract: For the self-anchored suspension bridge, the main load-bearing components are two main cables. As the main cable can not be replaced, so after the main cable is built, the linear and non-stress length under empety and bridge formed is not adjusted, or the adjust is minimal. Therefore, in the construction process, the various parameters of cable system must be accurate calculated to guide the site construction.