基于bepp2白光oled器件结构及工艺探索-微电子学与固体电子学专业论文.docxVIP

西安理工大 西安理工大学硕士学位论文 PAGE PAGE IV Abstr Abstract Title: Based on exploring BePP2 white OLED device structure and process Major：Microelectronics and Solid Electronics Name：Yanfeng XIA Signature: Supervisor：Associate prof. Tao AN Signature: Abstract Organic light-emitting diodes(OLED) has illuminated, solid-state, ultra light, ultra thin, high brightness, big viewing Angle, fast response speed, high resolution, low-power dissipation, superior seismic performance, flexible, low manufacture cost etc, and is known as the third generation display technology, the obvious advantages of OLED makes it appears in the LCD display industry dazzling star. With foreign OLED rapid development and influence, some domestic research institutes, universities and companies are working on OLED display industry research. This thesis mainly research on white OLED experiment, to expect glowing white light device structure, which provide certain reference for such research. Thesis adopts vacuum evaporation deposition method, on the ITO glass deposition hole injection layer and hole transport layer in turn, luminous layer, electronics, electronic injection layer and cathode layer, transport layer to complete the preparation of white OLED devices, determine the technological conditions of each functional layer, through the experiment to control a thin layer of evaporation rate, the uniformity and density, the main research, light-emitting layer and electron injection hole injection layer thickness and the influence of doping concentration on light-emitting device performance, and analyzes the mechanism of function layer parameters affect device performance, get good luminous performance white OLED device structure. The research contents include: 1) white OLED device structure design; 2) white OLED each function layer material evaporation sedimentary process experimental study; 3) the functional layer parameters effect the performance of the device shine; 4) light-emitting lay