基于fms理论的陶瓷墙地砖生产线的改进与应用研究-工业工程专业论文.docxVIP

摘 摘 要 本磷究应雳王盐工程技零与藤瑾针对彳s陶瓷榘霾菜厂翡一条年产200万平 方米陶瓷砖的生产线进行敬造。通过改变原生产线的瓶颈工序和原生产线的烧成 王芑，最终形藏一条年产362．2万平方米豹柔牲辫瓷砖生产毒l造系统，这撵豹生 产系统能适应目前市场小批量、多品种、变化快的消费需求。 本文鬻先对爨生产线避嚣了貔漉量分辑，找趣了藏臻王疗及冬工痔豹设冬负 荷系数，然后在此基础上建立新工艺的模型，根据现有生产线最大允许改造的条 传，袄蠡黛产线熟莓撼求褥掰生产线的最佳配置。矮露，本文重点磺究了糕瑟内 墙砖的一次烧成工艺，为生产线的改造奠定了理论基础。 透过生产线改造秘王芑技术磷突，零漯题达到了颈鬟避豹，改造后豹生产线 与原生产线相比，具有柔性特征(FMS)，它可以自由变化产品规格和装饰风格， 劳在不终产壤强下，嘉多秘产是生产方案选择。 由于粱性制造系统的建立，使在线产晶种类增多；由于采用了一次烧工艺， 搜褥薮生产线节按辍抉；产量提舞了8i。8％；由予生产节撼的加快，设备受蔚率 得到了较大的提高。 改造屡的生产线不仅舆各柔燃铡造特征，蔼照运霉亍成本明显降低，具菊较高 的经济效益和社会效益。 美键词：工业工程技术应 陶瓷墙地砖生产 柔，陡制造流水作业线 AbstractThis Abstract This research．applying IE techno]ogy and principle，makes an automatic production 1ine of ceramic tile which produces 2 miIiion square meters tiles every year be improved to be a FMS through changing original bottleneck working procedure and firing system．Finally，it iS going to become an automatIC production line which can produce 3。62 million square meters tileS every year and is provided with the character of FMS，and t}lus the improved assembly t ine C871 suit the demands of the present market for producing small batches with wide variety and quick changes。 This thesis analyses material flow of original production l ine and then finds out the bottleneck working procedure and loading coefficient of the equipment． According to the practical condition，the thesiS sets up a new mode of productlont According to the rhythm of original production line，the thesis attains the best scheme of new 1ine．In the meantime，the thesis Duts emphasis on the study of single firing technology of glazed wall tile，All of these establish theory foundation for improvement of original production 1ine． Through the improvement of production 1 ine and the study of technology and skill，the new production 1ine is provided with the character of FMS．It can change the size and decorating style freely without stopping production- Owing to the foundation of FMS，the kinds of products become more and more：Owing to the application