基于cst的宽频带毫米波微带天线研究-电子与通信工程专业论文.docxVIP

万方数据 万方数据 Subject ：Research of Wide-band Millimeter Wave Microstrip Antenna Based on CST Specialty ：Electronics and Communication Engineering Name ：ChenXia （Signature） Instructor：Wang Yamin （Signature） Fan Lei （Signature） ABSTRACT Microstrip antenna has many advantages, such as small size, light weight, easy processing, easy integration, however, the conversational microstrip antenna also has some shortcomings, such as the narrow frequency bandwidth and low efficiency, and these disadvantages are more obvious in millimeter wave .To overcome these shortcoming, the thesis introduces in details the basic principles of wideband microstrip antenna development and implementation of methods, focusing on the U-shaped microstrip patch antenna, E-type microstrip patch antenna, cavity-backed microstrip patch antenna ,ridge shaped ground plane microstrip patch antenna ground plane and loading frequency selective type surface (FSS) microstrip patch antenna has been studied with the three-dimensional electromagnetic simulation software CST system simulation. According to the current the design requirements and the needs of microstrip antenna t, under the conditions of miniaturized microstrip antenna, the thesis designs several microstrip antennas to broaden the bandwidth. The paper presents two slot slotted patch microstrip patch antenna, that is, U and E-type microstrip patch antenna, the design uses a low dielectric constant of the substrate material, and the performance parameters of both curves comparison, the test results show that: compared with the conventional microstrip patch antenna, having both wide bandwidth and high gain, the maximum bandwidth of approximately 9.5GHz (relative bandwidth of about 18%), gain of 10dB; For the micro- structure with an antenna, a simple analysis of the high dielectric constant of the substrate cavity-backed microstrip antenna and air medium ridged ground plane microstrip patch antenna, simulation results show that: the two antennas