基于arm的喷气涡流纺监测系统设计-通信与信息系统专业论文.docxVIP

万方数据 万方数据 ce ce of Subject : Design of Murata Vortex Spinner Monitoring System Based on ARM Specialty : Communication and Information System Name : Liu Jin-jie （Signature） Instructor : Ni Yun-feng （Signature） ABSTRACT Textile industry is an important part of the economy of China light industry. Since the murata vortex spinner was introduced into China as a new type of spinning equipment, good economic benefits has been brought . In order to ensure the efficient and stable operation of the equipment, it is particularly important to design a kind of high performance monitoring system for textile enterprises to make the continuant online monitoring on the work of murata vortex spinner. Firstly, the advantages and disadvantages of the monitoring system which centers on single-chip microcomputer, industrial PLC, IPC and embedded processor is compared and contrasted in the paper. It combines the structure with the function and characteristics of murata vortex spinner and proposes a distributed monitoring system scheme centered on embedded system scheme. The distributed monitor system is divided into two levels, including spinning host control level and working site level. Industrial ARM9 chip S3C2440 is adopted in the master monitoring layer as its core processor with low consume, high speed and abundant resources in the chip and carries Linux operating system, providing fine interactive interface. The main control layer is responsible for coordinating the operation of the whole system, at the same time, it monitors the running states of the spinning host. Working site monitoring layer consists of three common monitors and adopts high performance STC89C52 as the processor and the extending peripheral data collection module. The three common monitors respectively monitor the working condition of the electrical machine, lifting frame, transducer and relays splicer carriages during the operational process of the splice car, auto doffer and bobb