基于Minex软件的露天煤矿三维地质模型的建立及应用研究-采矿工程专业论文.docxVIP

- - I - 摘 要 本文介绍了 Minex 6.0 软件，它是澳大利亚 GEMCOM 国际矿业软件公司继 Surpac 矿山软件之后，经多年来矿山建模与开采设计经验总结研发的又一新的成果。 Minex 6.0 软件是专为层状矿床设计的地质、采矿软件，能够高速高效地建立矿床地 质模型，大大地提高了矿山设计的效率和质量。 运用 Minex 6.0 软件，以新疆后峡煤田黑山露天煤矿为例，构建了地质数据库， 将钻孔数据、煤层信息数据和煤层结构数据成功地导入进 Minex 数据库中，实现了 钻孔数据的三维可视化。研究探讨了 Minex 6.0 软件的构模方法和估值方式，采用 界面构模法，建立了地表模型、矿体三维模型和矿体质量模型，统一形成了新疆后 峡煤田黑山矿区矿床的空间三维模型系统。利用 Minex 6.0 软件的采矿设计功能， 实现了露天矿开采境界的确定并计算其矿田开采境界内可采储量，建立了首采区的 采场模型，并确定各个工程位置的煤岩量，为采矿设计人员编制开采进度计划及开 采工艺和设备的选择提供了重要的依据，大大提高了采矿设计人员的工作效率。 关键词：Minex 6.0 软件；界面构模法；三维地质模型；采矿设计 - - II - Abstract This paper introduces the Minex 6.0 software, it is a new result that set up by GEMCOM international mining software company in Australia following the Surpac mine software after many years of model building and mining design experience of research. Minex 6.0 software is designed for layered ore deposit geology and mining design software, it will be able to set up geological model in high speed and high efficienand , enhance the mining efficiency and quality of design greatly. Using Minex 6.0 software to take Xinjiang Houxia coalfield Heishan open pit mine as an example, it constructs the geological database, borehole data, coal information will be imported into Minex database successfully so as to realize the drilling data of 3D visualization. By use of the interface modeling method, establishing the surface model, orebody 3D model and orebody quality model, formed in coal mining area of ore deposits in 3D model system. Using Minex 6.0 software pit design functions, it realizes the boundary of open mining, calculates the ore mining field coasts recoverable reserves and sets up the first stope model, determines the position of each project of coal and rock, provides important basis for mining design personnel to make mining schedule and mining technology and equipment choice and improve the mining design personnels work efficiency greatly. Key Words： Minex 6.0 software; Interface modeling method; 3D geological model; Pit design - - III